#Focal pro calibration software manual#
#Focal pro calibration software software#
#Focal pro calibration software plus#

You can opt for semi-automated calibration testing, in which it does the testing and tells you the optimal microadjustment settings), or the fully automated process that determines the best setting and then applies it to the camera for you. It really takes the guesswork out of getting a good setup. It also includes a very useful вЂњtest environment checkвЂќ function that lets you know if you have set up everything up correctly (distance to focus test target, lighting, etc).

#Focal pro calibration software plus#

Plus is essentially only the automated microadustment testing and configuration. Apparently they used to also have Standard, but that is no longer an option. Reikan offers two versions of FoCal: Plus and Pro. FoCal will tell you if the camera is capable of this when you connect it. Note that if your camera supports it, you can run the calibration for the wide-angle and telephoto ends of a zoom lens and have different microadjustment settings for each. HereвЂ™s my lens at 105mm before (left) and after calibration and also the Lens Profile chart showing the microadjustment test data: FoCal generates a detailed report of each test (Pro version only, see below), including sample images so that you visually verify the improvement in focus sharpness. The 24mm setting was so close it didnвЂ™t need adjustment, but the 105mm setting was very far out of calibration. I had it test and calibrate my Canon 24-105mm f/4L at both 24mm and 105mm. HereвЂ™s one very tangible test result from my first run with the software.

#Focal pro calibration software manual#

Also, this was my first time ever using the application, and I absolutely did not read the manual before trying it out. I was able to test and adjust microfocus on all 5 of my AF lenses in about 35 minutes, and that includes about 15 minutes of setup time. But after testing FoCal 2.6 with my Canon 6D and set of AF lenses, I can verify that it is indeed a relatively painless process.

#Focal pro calibration software software#

Pre-printed targets do not need to be measured as FoCal will recognise the design and apply the correct dimension automatically.If you find that the process of manually testing and adjusting your camera body for autofocus microadjustment on all your lenses is tedious and time-killing, definitely consider spending a few dollars on ReikanвЂ™s very awesome FoCal 2.6 software and let your computer do all the work. Pre-printed or Hard Targets are available direct from Reikan in the online store as well as via our Reikan US distributor.

Self-printed targets are the most popular option, if you prefer you can purchase a pre-printed FoCal Target instead. The target image files are also included within the FoCal software download.

despite the user interface reflecting an incorrect estimate for target distance the calibration results are unchanged). Note, user entered target width information is only to estimate the target distance for presentation, it makes no difference to the calibration itself (i.e.

In order to determine the Target Width users will need to measure the printed target (amount should be measured in 'mm') along the line as shown on the printed target. It's possible to enter the target width within FoCal under Help > Settings > General Test Settings > Target Width. In those cases the estimate of target distance might be incorrect. There's a vector version that can be scaled without loss of quality but it is not generally needed Vector Target.ДЄ target printed to A4 or US letter size works well for most situations, if you're calibrating wide angle lenses at far distances you can print the target a little larger (or scale the image so the target design fills to the edge of the paper). If using a reflective print make sure the lighting is not reflected instead of the target design, stick to a matt paper is usually a safer option if not sure.Дownload the target image file by clicking FoCal Target вЂ“ 600dpi PNG which ideal for most users. Key thing is that the target design has good contrast when viewed from the camera position. Usually we suggest to avoid using glossy or semi-gloss paper, it can work ok but glossy paper can end up with reflections from the lighting rather than showing the actual high contrast black and white design. Once printed we suggest to mount the print on something stiff that won't warp or deform over time (foam core or similar is good). We've tried a lot of different printing techniques and found for best results a standard inkjet printer set for high quality printing on matte heavyweight A4 or US letter sized paper works very well. The FoCal Target is an important part of how FoCal works, information for self-printing the target can be found below.